Mac os 7.6 boot from cd
Very important information: The CD is not a burned copy and is not third-party software. OK, looks like I’ve left out details I didn’t think I had. It may not be attached correctly, or the drive itself is damaged. This situation also extends to booting, see the second bullet point under “If the 9.1 CD mounts”The CD-ROM drive has a hardware problem. If the drive is not an Apple-branded drive, the proper extensions are probably not installed. If the 9.1 CD doesn’t mount, but other ones do:Ĭheck for deep scratches.The 9.1 CD may be HFS+, but I’ve never encountered this situation.Ĭheck if the drive is an non-OEM drive. I believe the Cmd-Opt-Shift-Del sequence searches the external bus for bootable devices, so it wouldn’t help with the CD-ROM drive. The hard disk and the CD-ROM drive should be linked to the internal SCSI-2 bus. The 9500 has two SCSI buses - an internal SCSI-2 bus and an external SCSI-1 bus. If the drive is not OEM (it won’t have an Apple logo on it), this is the most likely cause of the problem.This gets hard. Many non-Apple OEM drives have trouble with C key booting. Try selecting the CD in the Startup Disk control panel.If this doesn’t work, check the manufacture of the CD-ROM drive. For some reason, the CD-ROM drive won’t recognize the CD at boot time.
![mac os 7.6 boot from cd mac os 7.6 boot from cd](https://i.ebayimg.com/thumbs/images/g/73sAAOSwaOhiT68R/s-l225.jpg)
Does it mount? If not, try another CD, any CD. Note: While 32 MB is the minimum amount of RAM required, it is generally considered too low for any useful work. If you have less, the installer may be complaining about that.
![mac os 7.6 boot from cd mac os 7.6 boot from cd](https://m.media-amazon.com/images/I/81omQqtpuLL._AC_SL1500_.jpg)
How much RAM is in the computer (Go to the Apple menu from the Finder, choose “About This Macintosh”)? OS 9 requires a minimum of 32 MB of RAM.